Industry news

What are shaving dies?

First, what is the peeling mold?

Shaving die is a tool used to peel the surface insulation material in copper wire processing. It is usually made of hard alloy, with high hardness, wear resistance, corrosion resistance and other characteristics, can quickly and accurately strip the insulation material on the surface of the copper wire, so that the surface of the copper wire is smooth and clean, convenient welding and conductive properties of the joint.

 

Second, what do you need to pay attention to when purchasing a peeling mold?

1. The quality of the peeling die: the peeling die is usually made of cemented carbide, steel, etc., so it is important to choose a peeling die with high quality, smooth surface and smooth incision.

2. Model of peeling die: Different copper wire diameters need to use different models of peeling die, so you should choose the appropriate peeling die according to your own required copper wire diameter when purchasing.

3. Knife edge of the peeling die: the width and thickness of the knife edge of the peeling die should be consistent with the diameter of the copper wire, and the depth of the incision should be moderate, otherwise it will damage the surface of the copper wire.

 

Third, the use of peeling mold need to pay attention to what?

1. The peeling depth should be determined before peeling: the insulating material on the surface of the copper wire should be thoroughly peeled, but the surface of the copper wire should not be damaged, so the peeling depth should be determined before using the peeling die.

2. Peeling should adhere to a certain Angle and method: peeling should be carried out in accordance with a certain Angle and method, and should not be too strong, so as not to damage the copper wire surface and peeling die.

3. The peeling mold should be cleaned up after peeling: the remaining insulation material on the peeling mold should be cleaned up in time after peeling, and the peeling mold should be maintained to extend its service life.

 

Four, the advantages and disadvantages of the peeling mold

1. Advantages: The peeling die can quickly and accurately strip the insulating material on the surface of the copper wire, making the surface of the copper wire smooth and clean, convenient for welding and improving the electrical conductivity of the joint.

2. Disadvantages: The peeling mold can only be used to strip the insulating material on the surface of the copper wire, and is not suitable for the processing of other materials.

 

In copper wire processing, it is very important to choose the right peeling die, which can facilitate the processing of copper wire and improve the processing quality and efficiency If you have not used the peeling mold, you may wish to try it, I believe it will become an indispensable tool in your copper wire processing.

 


Scan the qr codeclose
the qr code